Enabler provide industry advice on implementing the best email design optimisations to your B2B and B2C marketing communications.

Posts

Email marketing has undergone some fairly dramatic changes in the past 10 years, both from a strategic and technical standpoint.  Gone are the days of sending mass emails to your entire database which include generic product pushes, which are about as inspirational as the ‘one size fits all’ label on a piece of clothing.  One of the driving forces behind this change is that it  is now commonly accepted by marketeers that segmentation and personalisation of email campaigns are the ways to drive higher ROI, brand awareness and loyalty.

So how do we make sure every email we send is tailored to the personal needs of our customers?  We believe there are three things that have to be in place for this to be achieved:

  • Knowledge about your customers – Without understanding your customers, how do you expect to give them relevant content?  How do you determine what is relevant to them?

  • Data – How do you implement the right email strategy without the correct data in place?

  • A fantastic ESP (Email Service Provider) – that enables you to implement and successfully deliver a decent targeting strategy. (See Enabler’s functionality to see how it could do for you)

 

 

Knowledge About Your Customers

Your customer knowledge can come from your existing databases looking at the data that’s been gathered from previous customer activity (i.e. through forms, surveys or events), or it could be gathered from the customer’s email behaviour (opens, clicks, unsubscribes). However, even if you are starting from scratch, there are ways that you can build up a picture of your customers.

When it comes to using your customer knowledge to create effective email campaigns, we would highly recommend a personas led approach,  where you create profiles describing a particular group of your target audience based on their shared interests.  Grouping together these valuable pieces of customer information, such as challenges, goals, needs, pains and responsibilities, will help you create a ‘character profile’ which you can use to tailor your marketing so that you offer a personalised, valuable service. This information goes beyond normal demographic data and provides real insight into the customer’s life. If you want to enhance your understanding of your customers, check out one of Pancentric Digital’s Design Thinking workshops.

 

Data

Having the data that enables you to achieve your customer personalisation goals is imperative. For tips on how to acquire data click here. If you want more information on how best to retain your current customers try this one. However you decide to get your data in place, we’re going to assume you have done a great job of it, and skip ahead to the part everyone is waiting for….’How do I turn my data into relevant, personalised emails for my customers?’.

 

 

Dynamic Content

Dynamic or ‘Conditional’ Content allows you to use your customer data to create one email that displays different, unique content to each individual email recipient depending on their customer data. As the marketeer, you set pre-defined rules based on your customer data, so the customer only sees the email content that matches their data. Without this in place, you would have to create multiple emails with every possible content variation of based on your customer profile data (which is messy and time consuming) or just bulk email everyone with one message (which isn’t personalised and far less effective).

Sounds a bit abstract, right? So let’s look at a live example coming to us from the insurance industry. Full transparency here, the example we’re going to show you is an Enabler client, but they are using dynamic content in exactly the right way, so are the perfect example of how you should use dynamic content.  The company in question are Petplan, and we will take you through some examples of how they have used conditional dynamic  content successfully in their automated quote and buy email campaigns.

Below you will see an example of one of PetPlan’s emails with elements of the conditional code sitting within the template. From first glance, it looks like a fairly messy, basic template, however I’m going to show you just how clever this template really is.

– Email Template with Dynamic Conditional Content in Place –

Everywhere you see the phrase {conditional:xxx}, is a section of the email that will change based on the customer it is being sent to. This means, as soon as this email gets uploaded into Enabler, all those sections will look completely different and, most importantly, 100% personalised for each individual customer. Conditional elements can comprise of text copy, images, or a combination of the two.

Secondly, wherever you see {recipient_x_number}, that part of the email will also change to include a personal detail about the customer. This could be anything from their policy ID number to their name (or in PetPlan’s case, the pet’s name. )

Now let’s take a look at what that email would look like for a customer. (For the purposes of this, we have set created a fake customer within the Petplan system).

– Email Template with Customer Data Controlling the Dynamic Content –

As you can see, this looks like a totally different email. You will notice that images and copy have sprouted in all areas of the email, causing the look and feel of the email to change.

Let’s walk through the different elements which change based on the dynamic conditional content set up within the backend system of Enabler:

  • Images – the co-branding logo, pet image, roundel, and plan details all change based on customer information.

  • Alt text – the copy sitting behind each of those images will change based on the image itself, providing a fallback option if the customer has their images set to not display.

  • Lists – the ticks and bullet points in the two lower sections all change based on customer information.

  • Copy – there are too many instances of these to point each one out, but everything from the pets name, down to whether a sentence says ‘need’ or ‘needs’ changes based on customer information.

  • Terms and conditions – depending on the co-branding on the email, an extra paragraph will feature in the terms and conditions of the email. This will not be visible if co-branding is not in place.

  • Cover section – this whole section changes depending on which plan the customer has chosen. For this example, I have not chosen a plan, so I’m seeing all the options. However, let’s assume I had chosen the Covered For Life® 12k option, it would look more like this:

The best part about conditional content within Enabler is that you have a fallback option. This means if for some reason not all the data is held about the customer, (for example they are not sure which plan the customer has selected as in the example above) they will see a default view. This can be carefully chosen depending on what next step we want customer to take.

 

Benefits of Using Dynamic Content

Aside from the massive time saving benefits from an email deploying perspective, this style of email set-up will also save time in the future. Imagine having set up one template per customer variation. Not only would you be wasting time creating and testing all those emails, but when it came to updating them, you would also waste a lot of time. Even if you had one line of copy to change in each email, you may have to do it upwards of thirty times. In these conditional templates, you make the change once, and can then generate mass tests from the one template. Similarly, if you need to add something new to the emails, you are doing it once, rather than across a large number of templates.

Petplan are really at the forefront of creating dynamic templates, both from a strategic and build standpoint that put their customers first. From an agency standpoint, this is something we love to see, and the templates are also great fun (for an email nerd anyway) to put together.

However you choose to do your conditional content, make sure your data is in place, you have a great ESP solution in place, and you fully understand your customers before starting to build.

If you are interested in following in Petplan’s footsteps and bringing your email campaigns into the future but your current ESP doesn’t provide the necessary functionality, why not switch to Enabler.

The Graphics Interchange Format or GIF (although some people say ‘JIF’), turned the big 3-0 this year (2017), so we thought we’d say Happy Birthday – but now we feel old!

When someone says ‘GIF’ to me, it still conjures up images of 1980’s Space Invader icons waving their little pixelated arms, but now that we’re 30 years on, the GIF has taken on a new form and is slowly taking over the world of email campaigns.

A Brief History of GIF

As simplistic as the animated GIF once when the Space Invaders were all the rage, the GIF has now developed into something that doesn’t have to look so simplistic.  GIFs today are, as Daft Punk once said, are harder, better, faster, stronger. They have stood the test of time, and are now more detailed, bettered designed and better developed.  The GIF, simply put, is the underdog image-equivalent of Rocky Balboa, that always comes out fighting and on top.

GIF hasn’t always had the ring to itself when it comes to animated imagery.  Some early GIF contenders included MNG (Multiple Image Network Graphics) and APNG (Animated Portable Network Graphics).  Both used animated image graphics based around PNG, but were knocked out in the first round by development issues that hindered their progression.
Next on the scene was Adobe Flash, who went the full 12 rounds, threatening GIF’s title as the go-to animated image. Luckily for GIF however, Adobe Flash retired early due to security flaws and restricted mobile performance.

Today, GIF is being pitted against the new kid on the block – HTML5.  This newbie is the most current markup language that utilises new animated elements like the <video> tag for the display of short, silent, looping, moving picture files – examples of which can be found on Gfycat and Imgur.

However, even with this new contender, the GIF is still fighting strong after 30 years as one of, if not the most successful animated image, thanks not only to its versatility but also its accessibility.  You can find a GIF of almost anything, and with so many sites offering up high quality, easily downloadable and shareable GIFs (our personal favourite is giphy.com by the way), there’s no reason why you shouldn’t be using GIFs.

So Why Use GIF In Your Emails?

Over the years, the animated GIF naturally progressed out video games and into our emails. These little video gems act as the perfect format to capture someone’s attention within the inbox, as Dell discovered when they launched their XPS 12 Convertible Ultrabook™, using an animated GIF to show off it’s flip function.

In fact, an animated GIF incorporated into your emails can help increase click-through rates by up to 42%.

How Will You Use Yours?

Depending on your email content, GIFs can be utilised in a variety of ways: for fun, style or informative. Here’s some examples below:

Fun Promotions

One of the most ‘must-watch’ TV shows right now is the NETFLIX Original Series “Stranger Things”.  To promote the launch of the new season, Netflix used a creepy GIF in their email marketing timed perfectly with the show’s backdrop and released just before Halloween.

Another creepy example comes from Email Monks, who showcased a creative yet spooky CSS3 which featured an interactive GIF for their “Annabelle Creation” email, with clever animation, click response and some extra eerie added sound.

Style

Big brands like Nike are known for producing some very clean, stylish emails featuring  big images and subtle GIF animations.

Uber produced a simple but very effective looping GIF for their email marketing campaigns, featuring a great branding style combined with some simple animation.  Just goes to show that your GIFS don’t have to be hugely elaborate – sometimes clean and simple (if done right) can look stylish.

Informative

Show off their new VW Beetle, Lego used an animated GIF carousel within their email campaign, showcasing image comparisons, different viewpoints and workings of their beach bug. So remember, sometimes a simple carousel of images can be the most effective GIF, rather than something elaborately complicated.

Everyone loves a ‘How-To’ video, which is why the GIF in Harry’s Instagram email campaign is so effective, with its short run-through of their Instagram account featuring an interactive behind-the-scenes experience. Simple but informative.

So Now To The Eternal Debate…

Is GIF Pronounced With A Hard ‘G’ or Soft ‘G’? – that is the question.

Apparently the GIF developer, Steve Wilhite intended a soft G, saying it deliberately echoed the American Peanut Butter JIF. Personally I would say hard G, as the G does stand for ‘Graphics’ after all. Even the former President of the US, Barack Obama had his say on the matter:

“A GIF, I’m all on top of it. That is my official position”
Barack Obama

What Does The Future Hold For GIFs?

Brought up on the Netscape streets, the GIF fought it’s way through many a animated battle to become a legend graphic amongst its peers.  From kids to professional marketers, everyone loves using a GIF.  These little snippets of animation can capture your attention and your emotions in a way that a still JPEG just can’t – and it’s for that exact reason that email marketers love the GIF so dearly.  The GIF has adapted to its competitors to become the champion of the animated image, and just like the JIF/GIF debate, the GIF will be around for a long time to come.

So, with the festive holidays approaching, I will leave you with the full GIF movie of ELF.

Enjoy!

Video may have killed the radio star, but it’s certainly alive and kicking in email.

You probably already know this, but adding captivating and entertaining videos to your email content can significantly increase your click-through rates.  Having video content that drives end users to take actions, helps provide you with a better insight into user engagement and interactivity, and as Michael Litt once said…

“The play button is the most compelling call to action on the web”
Michael Litt – Vidyard CEO

Let’s take a look at the different types of video is being utilised today, plus some coding tips on how to implement video within your own email marketing.

Lights, Camera, ACTION!

The Prequel

In today’s online world, video is everywhere – streaming out the sides of the internet and going full screen on every platform. Videos online evolution can be associated with renowned sites such as YouTube or Vimeo, both created in the early 2000s. These types of sites have transformed the way we see and interact with videos online, paving the way for video sharing, streaming, higher visual and sound quality, and the significant development of audience targeted programming.

Nearly all social media channels today have involvement in video; Facebook, Instagram, Snapchat, Google+, Twitter – to name a few. So it’s no surprise that videos next evolutionary step was into email… in fact it would have been unusual not too.

The Main Feature

So let’s take a look at how you can take advantage of the benefits of having video within your own emails, by giving you some helpful tips on how best to implement it.

Please place your mobile phones on silent, turn off any recording equipment and sit back and enjoy the show…

There are two main ways of placing video into your emails.

The first would be to have an actual mp4 video file playing directly within your email using HTML5 video, with a fallback image for those email clients that cannot play video.  Unfortunately because the list of email clients that support a full working embedded video file is quite limited, the fact is your fallback image is more likely to be displayed than your video… which makes your video file a bit of a B movie email.

The second, not so advanced but more widely accessible method, would be to incorporate a link to a video within your email by using an animated image or GIF of a video. Utilising a GIF (see below) instead of a full video file ensures your video is more likely to be supported by email clients.  So your end user gets the impression of a full working video, while you relax knowing you haven’t got the drawback of your video not displaying within your email.  Using a video format that’s more widely supported, like a GIF, allows you to reap the benefits of having a blockbuster email that drives higher engagement levels.

For more information on the benefits of GIFs, check out our blog: Quick Guide to GIFs in Your Emails

The Visual Effects

Now, if you do decide to go down the route of embedding a full video file with a fallback image in your email, we’ve got some technical tips to help you along the way.

Let’s take a look at the code* below and go through how we actually get a video embedded within an email.

As this is a HTML5 build we can start with simple doctype: <!doctype html>

Within the stylesheet the video is wrapped in a display: none, until requested to display: block, dependant on the viewing platform. Vice versa for the Video fallback.

The @supports styling are workarounds for different iOS platforms and a Yahoo fallback. #MessageViewBody is for displaying video with the Samsung email client on the Galaxy range.

The next two sections are the video section, with a pre-play/poster image, and the first fallback image, for those email clients that don’t play video.

The second fallback section is for email clients that load the pre-play image but won’t play the video. This just links an image to an online or streamed version of the video.

The size of the video can be set inline, currently 320×176, just remember to set/change it for the fallback image as well.

<!doctype html>
<html>
<head>
<title>Jellyfish</title>
<style type="text/css">
.video-wrapper {display:none;}
@media (-webkit-min-device-pixel-ratio: 0) and (min-device-width:1024px)
{
.video-wrapper { display:block!important; }
.video-fallback { display:none!important; }
}
@supports (-webkit-overflow-scrolling:touch) and (color:#ffffffff) {
div[class^=video-wrapper] { display:block!important; }
div[class^=video-fallback] { display:none!important; }
}
#MessageViewBody .video-wrapper { display:block!important; }
#MessageViewBody .video-fallback { display:none!important; }
</style>
</head>
<body>

<!-- video section -->
<div class="video-wrapper" style="display:none;">
<video width="320" height="176" controls="controls" poster="blob:https://docs.google.com/91acb26d-2833-4aa8-ae04-b37816b9a9e6" src="http://mirrors.standaloneinstaller.com/video-sample/jellyfish-25-mbps-hd-hevc.mp4" >
<!-- fallback 1 -->
<a href="http://mirrors.standaloneinstaller.com/video-sample/jellyfish-25-mbps-hd-hevc.mp4" ><img height="176" src="blob:https://docs.google.com/91acb26d-2833-4aa8-ae04-b37816b9a9e6" width="320" /></a>
</video>
</div>

<!-- fallback section -->
<div class="video-fallback">
<a href="http://mirrors.standaloneinstaller.com/video-sample/jellyfish-25-mbps-hd-hevc.mp4" ><img height="176" src="blob:https://docs.google.com/91acb26d-2833-4aa8-ae04-b37816b9a9e6" width="320" /></a>
</div>

</body>
</html>

The Sequel

Now if you’re not one for coding, there are some companies, like playable.video, that will take your video file, convert it and provide a 10 second clip with the code to embed into your email.

Our best practice top tips would be to use a small video file size within your emails – just like images you don’t want a long download time. So if you like the mentality of “build it and they will come”, having engaging video content within your emails could give you that edge over your competitors, meaning more subscribers, more clicks and potentially more sales!

Updates and testing are ongoing for video in email.  The above code was edited at the end of 2017. In the meantime, “the first rule of video” is not to forget the fallback imagery… “they may take our video, but they will never take our images!”

The future of video will hopefully provide streamable videos directly in your inbox, meaning “where we’re going, we don’t need fallback images”…but that’s (potentially) in the future.

So “show me the videos” and lets see your emails go “to infinity and beyond”, and “I’ll be back” soon with more blogs.

 

*Code from Justin Khoo of Freshinbox – Codepen https://codepen.io/freshinbox/pen/yMLLoX

An API (Application Programming Interface), believe it or not, is an interface between two software programs. It essentially allows the two programs to make use of each other’s services and resources, and interact with each other. You can think of them like tunnels between programs that allow them to work together… and all without exposing their inner programming!

You might not realise it, but you will probably use APIs nearly every day of your life. For example, an API would let you open a chat window inside an app, or let you run a map program on your website. Being totally honest with you, it’s really hard to get really excited about APIs themselves, (my development team are shaking their heads in dismay as I write this), but what is worth getting excited about are the benefits APIs have for marketing purposes.

Most email systems today will have some sort of built in API functionality where, with a little effort, you can link your company data systems to your email service provider. This is something we do with Enabler’s email marketing software, allowing is to provide the option of adding bespoke APIs completely tailored to your data needs.

From an email marketing perspective, APIs allow you to do some really cool things that allow you to deliver much more targeted messages to your consumers, helping with both acquisition and retention.

APIs and Automation

API integrations allow your data that’s being stored elsewhere (i.e. CRM system) to be drawn down into your email system.  Giving your email marketing software direct access to your customer data has big benefits for enhancing and deploy your emails, especially when it come to marketing automation.

Let’s take a look at an API example in action.

eBay:

eBay utilised an API integration to send out a daily product email to their customers. Each deals displayed within the email is being automatically drawn from the eBay product pages. The deals changed daily on the website, and because an API was set up between the website and the email campaign, it meant the email deals changed also to reflect the website. This meant that the marketing team could send the same daily emails without so much as a single edit to the actual email content, and know that everything in the emails would be automatically updated to reflect the current deals.

The smartest thing about this API integrated email is yet to come however…  If a recipient opened this email the day after it was sent, they would see the content for the day they opened, not the day it was deployed, meaning they always saw the latest deals.

The reason API integrations are so powerful is because the data being pulled through the API already exists, and as a marketer all you are doing is bringing that information into your campaigns.

Other uses for API content within email:

  • Customers of airlines and ticketing venues can select or upgrade the latest seats from within an email.
  • Restaurant guests can receive special deals and reserve seats in real-time within a few taps.
  • Doctors appointments could be made from within an email simply by displaying an up-to-date list of appointment times.
  • Hotels could send loyalty emails to their customer base and guests could reserve a room directly from the email.
  • Sending a welcome email to a customer when they sign up on your website.

APIs and CRM management

API’s also serve another function in the world of email. Let’s say you have a fantastic CRM system, but sadly it doesn’t send email…now in the old days this would have meant exporting data from that system, uploading it into your email tool, sending an email, exporting the unsubscribes from that email, and re-uploading into your CRM. I don’t know about you but I get exhausted just thinking about that process. Luckily, those days are over! You can now use APIs to help manage your data across multiple systems.

When transferring data between systems, an ‘API call’ is made. An API call is an individual interaction between the two applications through the API, for example when a request for data is made from one system to the other using the API. This allows the two systems to keep your data up-to-date across both systems simultaneously without any manual intervention.

APIs and Security

Each time a data transfer happens, lots of Personally Identifiable Information (PII) is being handled, so security is vital (especially with the GDPR updates coming in May!). Best practice for security when it comes to APIs is to assume that everyone is always out to get your data. Now, it’s also good to remember that not all APIs are equal, and not all vulnerabilities will be preventable. An API gathering weather data does not need to take the same precautions as an API that is sending patient’s private medical data.

The best way to ensure this data is kept private during transfer is by using encryption. With sophisticated key management strategies, or encryption key management strategies, the data can become accessible on a need-to-know basis.

The process works something like this:

1. Authenticating with the web server before any information is transferred

Authentication is used to reliably determine the identity of an end user, while Authorisation is used to determine what resources the identified user has access to.  Authentication and Authorisation are commonly used together.

On the web, Authentication is most often implemented via a dialog box that asks for a username and password. For added security, software certificates, hardware keys and external devices may be used.

2. System decides which resources or data to allow access to

Once the user is authenticated, the system then decides which resources or data to allow access to. For APIs, access tokens are commonly used, either obtained through an external process (for example when signing up for the API) or through a separate mechanism. The token is passed with each request to an API and is validated by the API before processing the request.

The best solution is to only show your authentication key to the user once. It’s their responsibility to hold that key near and dear. Think about it this way – would you trust someone who kept losing the spare keys you gave them…?

This all sounds great, why doesn’t everyone do it?

API setup can be complex, especially if you are navigating your way around big data and different systems and teams. More and more however, companies are realising that API integrations are the way forward for making your marketing campaigns truly personalised, more interactive and the most enjoyable experience for your customers, and are investing time and resource into getting APIs set up. Additionally, from an internal perspective, they will save your team and company time in the long run.

If you want to chat to us about how Enabler’s APIs could take your email marketing to the next level, please get in touch.

Is it a bird? Is it a plane? No it’s Kinetic Email!

“Kinetic email… what’s that?” we hear you say. “That must be the latest in email development!” Well… actually, despite sounding like a new type of superhero, Kinetic emails (or as we sometimes call it ‘Captain Kinetic’), have been around for a few years now.

Kinetic email was coined by the Oracle Corporation in July 2014 for their B&Q email marketing campaign. The email they produced used HTML5 and CSS3 and contained an interactive hero image carousel, which was triggered by mouse hover buttons.

B&Q had great results from their debut Kinetic email;

  • 18% increase in responder-to-open rates, with 32% increase among club members.
  • 42,000 click-throughs to the website.
  • 30% decrease in time spent on email.

(Click here for the full marketing report from Oracle.)

The clever part of using a kinetic carousel image which housed all the information and links meant there was less time spent in an email by the user.  A regular email format would have seen users scrolling down through different sections, with the information and links spread out across the email – the Kinetic Hero, however, had everything in one place.

B&Q successfully decreased the time spent in email and upped the click through rate, by directing the user (via the interactive carousel), without the need to scroll through the whole page.

The Power of Kinetic

So the basis of Kinetic images within email is the use of CSS3 transitions and animations, which opens up lots of possibilities for captivating or interactive emails.
Some dynamic content examples that Kinetic email might utilise include:-

  • Hamburger style menus
  • Forms
  • Graphs
  • GIFs
  • Polls
  • Tap to reveal
  • Flip / hover / carousels or slideshow images
  • Embedded video and more…

As you can see, Kinetic Heroes have a lot of work to do.

Kinetic Heroes And Their Many Disguises…

Just as superheroes have their different identities, i.e. Spider-Man and Peter Parker or Superman and Clark Kent, Kinetic emails can be broken down into three different types:

1. Kinect

These are the emails that utilise CSS transitions and animations. A good example of this is the auto scroll carousels.

2. Kinetic Interactive

These type of emails are where the user actually interacts with the email. The example below has a collapsible hamburger menu. Other examples could be a carousel where each slide has a clickable button.

Increasing profitability, maximising return on investment, improving market share etc, etc… Like any business, these objectives, as well as others, will be something that we all strive to achieve at one time or another… but how?

Well, if your marketing campaigns are not customer-focused and highly engaging, your business could ultimately be shooting themselves in the digital foot. This all comes down to having a good strategy in place that not only piques customers’ initial interest, but continues to nurture over time, ensuring they purchase again and again.

If a business is to grow, keeping those customers on board who have previously engaged or purchased is extremely important. One of the easiest ways to do this is to create a strong brand identity that makes your past customers think of your product first over any competitors. For example, when you want to find something out – what do you do?  Straight to Google – in fact it’s even become a verb in itself…!

What Does An Email Campaign Offer?

In today’s social media driven climate, we can spend hours updating statuses, engaging with tweets and hashtags, or even finding the best filter to showcase our big promotion. But even with all these social tools at our disposal, email marketing is still one of (if not the) most cost effective and efficient way of staying at the forefront of your customers’ minds.

According to a study by Workhorse, email marketing drives more conversions than any other digital marketing channel – including search and social.  With that said, it’s worth bearing in mind that content plays a huge part in how a person actually behaves when their smartphone notifies them of the ‘millionth’ email they’ll receive that day.

One of the big advantages email has over other marketing tools is its ability to provide personalisation.  Simple tools such as merge tags can help transform your marketing emails into something that feels far more personal. The table below shows examples of tags we have readily available in our own email platform, Enabler. These tags reference personal data stored within the system’s contact database:

By including a recipient’s first name in the correspondence and/or subject line, it takes your marketing communications away from an impersonal intrusion and into a more personal, friendly place which can be highly beneficial for improving your retention rates, with recipients feels that little pang of appreciation as they realise they are a valued customer. Think about it, we all appreciate that feeling of being welcomed or recognised when walking into our local shop or restaurant, and the same can be said when receiving an email, and goes way beyond just adding their first name.  That added personal touch should be added to all your content communications – from contacting a customer with special offers to wish them a happy birthday, to targeting communications based on their personal shopping habits can all go a long way to continually converting that customer.

Businesses who achieve high customer retention rates will see a better return on investment, it’s as simple as that.

Interesting Facts:

  • 81% of online shoppers who receive emails based on previous habits are likely to purchase as a result of that targeted email (eMarketer)
  • Email is 40 times more effective at acquiring new customers than Facebook and Twitter (McKinsey)

So How Can a Business Ensure Customer Retention Via Email?

As previously mentioned, email content will be the main aspect to focus on in terms of grabbing your customer’s attention. Enticing emails that are informative and encourage the person to interact, gives greater opportunity to drive that person towards either a specific website, landing page or document.

A good example of this technique being used successfully is by the product review emails sent by Amazon after purchase:

Not only does it immediately get the customer interacting as it gives them the opportunity to voice their opinion, but it increases traffic to Amazon’s website opening up the likelihood of a repeat purchase or interaction with other products on their site. Additionally, redirecting traffic to specific pages helps with analysing data and segmenting customers into groups, which helps to avoid spamming them in future correspondence…no one wants to receive those dreaded unsubscribe notifications!

There are numerous ways an email can be built, but in order to maximise engagement a combination of the following formula is useful:

  • Unique selling proposition
  • Call to action
  • Product benefits
  • How it works
  • Personalisation
  • Loyalty reward
  • Thank you

Emails that contain some elements of this formula make it easier for your customers to engage, especially if the content stands out. Customers who regularly engage with your brand are more likely to show loyalty if you set them up for success with personalised content, helping to keep customer churn rates low.

In order to maximise interaction with your emails, consider devising campaigns separated five to eight emails; think of it as taking the consumer on a journey, covering aspects of brand explanation, benefits of purchasing and special offers. Without over exaggerating the direct sell, this method shows the customer an in-depth explanation of specific aspects of the campaign which helps to increase brand trust and ultimately persuades them to buy.

Examples of Sticking in Customers’ Minds

Prices Falling with Booking.com

January, or even winter on the whole is a time when many people look for their next holiday destination. While there are many sites out there, Booking.com have a very clever strategy of re-targeting users who have searched for places to stay in a particular area but have (for whatever reason) not made a purchase. The image below is from an email I recently received – from the personalised subject line to the informative content regarding discounted rates, the call to action immediately grabbed my attention reminding me I needed to book accommodation before it was too late. I ultimately did, furthermore receiving a 50% discount for my next booking which will be at the forefront of my mind for future trips, while keeping that lot from the Booking.com retention team happy as well!

Monetary Discount with Treatwell

Treatwell incentivise their customers by offering discounts for future bookings by leaving a review. Their reviewing system is user friendly and encourages a click through in order to receive the £5.00 discount, as well as including a deadline date which also encourages the consumer to act quickly to avoid missing out on the offer.

Free Delivery with UberEATS

Not only does Uber provide us with rides home at a push of a button, they now also bring us our favourite food through their UberEATS app (what would we do without them eh…..?!). Their offer of free delivery to app users is straightforward with a clear call to action (see image below), the smartphone gives the user an image of how to receive the offer, and the inclusion of a promo code gives UberEATS the ability to track and analyse user flow to determine whether the campaign has been successful.

So we can safely say that a business will benefit from implementing a high-quality email campaign strategy, focusing on providing content that invites their customers to interact with their emails. By creating content which either informs your customers about your products or offering incentivised click throughs will definitely help to keep retention rates high.

As long as your business understands its audience and gathers useful, relevant data, it will be able to connect with and apply targeted content to maximise customer interactions.

If you’re interested in putting your business at the forefront of your customers minds, why not join one of our Design Thinking sessions this year.

If you’ve read our previous blogs or visited our site before, you’ll probably have gathered that Enabler is a piece of email software. However, what you might have missed is that Enabler is more than just your bog-standard piece of email software, sporting sophisticated features which go beyond bulk sending emails. *Cue gasps and other associated shocked noises*

One of these features is Enabler’s Form Builder – you can use this clever piece of kit as a standalone form, embed it into a landing page or website, or use the form as a back-end tool for data capture. To demonstrate how effective these sophisticated Enabler Forms can be, I’m going to showcase a recent example from one of our clients, Real Estate Management UK Limited (REM) – asset manager for The Shard – where we utilised Enabler Forms in their Shard Lights 2017 marketing competition.

The Brief

Driving Engagement for an Iconic London Brand

Since 2014, The Shard has hosted a light show from it’s spire every December, aptly named #ShardLights, to celebrate the festive season. In 2017, Shard Lights introduced five colours into its show, rotating one per day with an array of visual effects including gradients, patterns and sparkles. These visual light effects occurred every 15 minutes, with an extended display on the hour which transformed The Shard into a spectacular visual timepiece for London.

Now, Enabler’s offices are based literally around the corner from this stunning London landmark, but not everyone is lucky enough to have such natural daily exposure to this amazing light show.

So, to ensure maximum engagement with The Shard during this time, the REM marketing team wanted to run a photography competition to encourage the public to take pictures of The Shard’s light show and share online using the hashtag #ShardLights.

As an existing Enabler client, the marketing team at REM gave our campaign management team the task of creating an engaging campaign with the following key requirements:

  • Hosting the photography competition
  • A way of collecting entries and associated entrants information
  • A trigger email going out post competition submission to recipients

 

 

Our Solution

We decided that the best way to achieve the goals laid out in the brief, would be to build a standalone landing page within Enabler which hosted the photography competition. We would then create a built-in Enabler form within this landing page, which would trigger an email to the recipient when completed to confirm that their entry had been received.

The Design and Build

For such an iconic London landmark, the design for the landing page was incredibly important. Our team of designers had to ensure stunning imagery of The Shard, provided by the REM team, was being used whilst also making sure all the relevant information was clearly visible on the page for entrants.

Here is the template webpage design before our specialists started the more sophisticated build:

When translating this design into the build, our developers took the simple static images within the email and transformed them into parallax scrolling images – this allowed us to display the full images without taking up too much real estate on the webpage.

The most important factor our development team focused on was ensuring the form on the frontend of the webpage was linked properly to the form on the backend of Enabler.  The REM marketing team were utilising Enabler’s database to house and access the data from submitted entries – so making sure the forms were linked was vital.

 

Using Enabler Forms for Data Capture

Enabler forms are extremely effective for data capture, allowing you to embed forms onto your website that connect directly into your marketing database. There are two main ways you can embed Enabler forms within an external system.

The first and simplest way is iframing, which involves taking a snippet of code that looks like this:

<iframe src="https://ue.enablermail.com/realestatemanagement/frm/index.cfm?id=A480A319-7983-4C4B-993D-E97064B7C7A5" width="750" height="500"></iframe>

You then embed this code within your desired webpages, which then displays your form exactly as it appears within Enabler – including Enabler’s styling and layout. This, however, wasn’t an option for the Shard Lights web build, due to the beautifully bespoke styling that was required from the form’s design.

Instead of iframing, we used the alternative method of embedding and Enabler form, which is the ‘Form post’ option.  Now, this is a much more technical way of approaching form submissions, but it does mean you can style your Enabler form exactly as you want on the frontend of your website.

 

Now For The Technical Bit…

To make ‘Form posts’ work, you have to tell your form to post submissions to Enabler’s servers. Each individual form field will have an ID associated with it, but all these fields will be stored in the same place in Enabler ensuring you can review and pull all the required data out at once. I’m not going to go into the super technical stuff because a) I leave that to my developers and b) you don’t want to hear it!

Once someone submits a form post, the message (seen below) displays on the website.

However, we also wanted to ensure that each entrant would receive an email confirming their submission as well (for added peace of mind that we had received their entry). To this end, we also triggered an email to go out each time a form submission was received, (as shown below), letting entrants know when the competition closed, and by what date they would be notified if they had won the competition. It also encouraged a social push for the competition for maximum social media traction, using the hashtag #ShardLights.

 

So, it’s all very well collecting this data and all these (hopefully) stunning images, but where would they all be stored? Now, usually with form submissions you go into the form, run a report and it shows you a list of text entries and what those entries said – however for a photography competition, we had to develop something a little different to display images…

If you’re sitting there thinking…”hang on that looks just like Enabler?”, then you’d be absolutely right. Our development team have created a bespoke image gallery where the REM marketing team were able to view all the images submitted at once (making it easier to select a winner), while also allowing them to click into each individual picture to see all of the details of the person who submitted the photograph.

Outcome

The competition ran from Monday 4th December 2017 until Sunday 7th January 2018, and received a total number of 871 entries. Some of the photos were absolutely stunning, and to be completely honest, some of the entries were basically close up selfies of peoples faces, but all in all we have some fantastic photographers out there parading the streets of London, and I don’t envy the REM Marketing Team having to pick a winner!

We had a fantastic time doing this project, it’s always great for our email team when we can really push Enabler’s functionality in ways that people wouldn’t expect from email software, helping our clients deliver beautiful emails alongside websites that really help them achieve their marketing goals.

Engagement levels like this also go to show the impact well thought out, well designed data capture forms can have on your marketing campaigns, and goes to show the importance of combining your data capture with your email marketing campaigns.

 

If you like what you’ve seen here or want to learn more about form functionality, please drop our Enabler team an email and we can talk about your next exciting project.

“If you were a web font, what web font would you be?”

I was once asked a very similar question in a job interview, but that time it involved biscuits.

“If you were a biscuit, what biscuit would you be?”  It’s personal preference, and there is a wide choice of biscuits out there…and it’s the same with fonts, with designers and developers enjoying an immensely varied selection of standard ‘Web Safe Fonts’ or the more daring ‘Web Fonts’.

(And for those still wondering about my choice – it’s the Bourbon biscuit, always the Bourbon.)

 

Safety in letters

So what are the differences between Web Safe Fonts and Web Fonts?

Web Safe Fonts

These are the standard available system fonts found on everyone’s operating system. So it is ‘safe’ to assume it will render correctly across email clients and platforms.

The most common Web Safe Fonts include:

  • Arial/Arial Black

  • Helvetica

  • Times/Times New Roman

  • Courier/Courier New

  • Palatino

  • Georgia

  • Garamond

  • Bookman

  • Comic Sans

  • Trebuchet

  • Impact

  • Verdana

Out of these Helvetica and Arial are the standard fonts of choice, whereas others are frowned upon… like Comic Sans.

Comic Sans was released with Windows 95, it had a bright start in life, and this was possibly it’s downfall. “Hmm that Times New Roman header is just too serious, what can I use that’s more fun and quirky… Comic Sans, it even sounds fun.” The font was overused and wasn’t a good font to start with. The character weight too heavy and poor kerning (the space between characters) made it a designers arch enemy.

 

Web Fonts

These are licensed fonts, hosted and accessible either by purchase and download, or linked/imported via a host site like Google Fonts. Although these web fonts provide you with a much wider choice of fonts, they don’t yet all render 100% across all devices, so you should use them wisely.

At present, a small range of email clients accept web fonts, including:

  • Android (default mail, not Gmail app)

  • AOL Mail

  • Apple Mail

  • iOS Mail

  • Outlook 2000

  • Outlook.com app

  • Thunderbird

However this small number does cover the majority of the top 10 email clients being used today.

Google Fonts started up 7 years ago and provides fonts for free, but if none of the 800+ Font Families float your boat, you can always purchase fonts from numerous web font services, including:

Obviously hosting your own fonts is safer than relying upon a third party server. On the off chance that Google gets bored of providing free fonts and decides to stop the whole project, at least your “Gotham” won’t become “Georgia”.

Ideally web fonts should be an email designer/developer’s preference, the varied choice and potential impact of a unique font could help boost opens and drive click through rates, and without sounding like a supermarket advert, every little helps.

 

Web Safe or Not Web Safe?  That Is The Font Question…

The ability for your fonts to render properly in someone’s inbox can actually have a big impact on your click through rates, and not always in a positive way, so your choice between web safe fonts and web fonts is sometimes more than just a style choice.

For instance, you might think that ‘Lato’ font looks great in your new email newsletter, and when you see the ridiculously high click through rates of  70-80% you think you’re campaign has been a roaring successful. But when you look more closely, you discover that the majority of those clicks were people clicking a ‘download font’ link prompted by their device or browser because it doesn’t have or support the ‘Lato’ font.  This ‘download font’ link has now completely skewed all your click through rates and reporting stats.

So, think carefully before you choose a web font instead of a web safe one.

Now that you’ve made your font choice, let’s get them coded into your email.

 

Adding Web Safe Fonts To Your Emails

Looking at web safe fonts first, these would sit in the html as inline styles, like so:
(for this instance, we’ve chosen ‘Georgia’ as our web safe font)

<td align=”left” style=”font-family: Georgia, Arial, Times, serif; font-size:20px; line-height:30px; color:#000000;”>Extra, extra, read all about it</td>

Notice that the font-family has others listed after your initial or main font ‘Georgia’, this means that if for some reason Georgia doesn’t render in your email, ‘Arial’ will be next, then ‘Times’ and so on and so on – these are what is known as fallback fonts.

Outlook 2007/10/13 have Times New Roman as their default fallback font. Even if you set your own fallback fonts within your code, Outlook will ignore them.  However, if you want to avoid Times New Roman, this can be fixed with some code in the header:

<!–[if mso]>
<style type=”text/css”>
body, table, td {font-family: Georgia, Arial, sans-serif, Helvetica !important;}
</style>
<![endif]–>

 

Adding Web Fonts

We can add web fonts in a number of ways, but all are added to the head stylesheet of the email. As an example let’s use the popular Google ‘Roboto’ font.(https://fonts.google.com/specimen/Roboto)

After you have selected the “Roboto” font you will be given a Link or @import option.

<link href=”https://fonts.googleapis.com/css?family=Roboto” rel=”stylesheet”>

Or

@import url(‘https://fonts.googleapis.com/css?family=Roboto’);

Then to call the font you use font-family as normal:

<td align=”left” style=”font-family: ‘Roboto’, sans-serif; font-size:20px; line-height:30px; color:#000000;”>Extra, extra, read all about it</td>

The difference between Link or @import is the loading. @import waits until the html code is loaded, causing a delay to display, and a possible jump between the fallback font and the web font. Link is the opposite, it will load inline first as the code is read from top to bottom. Depending on the font used it could cause a delay for the whole email to display.

Link also offers the option of preferred or alternative style sheets.

The last font option is @font-face, this is possibly the most precise web font method.
It allows you to pick the file format from .woff, .woff2, .ttf, .eot & .svg. The former .woff format being a email developer’s choice, due to more email support.

@font-face can be dropped into the head style sheet just like @import and Link, and looks like this:

@font-face {
font-family: ‘Roboto’;
font-style: normal;
font-weight: 400;
src: local(‘Roboto’), local(‘Roboto-Regular’), url(https://fonts.gstatic.com/s/roboto/v16/DDBbt_SKtg0EqyMEnMOuTX-_kf6ByYO6CLYdB4HQE-Y.woff) format(‘woff’); unicode-range: U+0460-052F, U+20B4, U+2DE0-2DFF, U+A640-A69F;}

If you are obtaining the font from a provider like Google Fonts you will need to copy the url in the provided link and paste it into Internet Explorer or Safari to view the @font-face.

<link href=”https://fonts.googleapis.com/css?family=Roboto” rel=”stylesheet”>

 

There’s always an Alternative

Don’t forget your images Alt text, the web fonts have limited platform rendering, but there is no harm in adding some style. We are not talking anything fancy like a Velour jumpsuit and house slippers here, after all this is just the text that loads when your email image doesn’t.

That Alt text can be styled with font-family, font-size, font-colour, text-decoration etc. try and match the image style, and get your email looking good even before the images are loaded.

<img src=“images/grandpa-style.jpg” width=”200″ height=”40″ alt=“Grandpa Style” style=“font-size:16px; font-weight: bold; font-family: ‘Roboto’, Arial, Helvetica, sans-serif; color:#000000;”/>

 

Put the kettle on

So break open the packet of Bourbon biscuits, put the kettle on for a brew and go crazy with the multitude of font families at your fingertips.

Emojis are everywhere…on social media platforms, blogs, text messages, and now they are even in movies. They are used by almost everyone – even your grandma (once she’s worked out how her smartphone works).  Although you personally might not use them, it is highly likely that someone has sent you an emoji on more than one occasion by now.

One platform where emojis are undoubtedly quite useful is email marketing; especially when your open rates are at stake!

With marketers making every effort to cut through the noise within the inbox and get their message seen by their target audience, emojis come in quite handy.  When used appropriately, these little emojis can be a huge help with increasing open rates.

Before choosing whether to use or ignore them, perhaps have a quick read about our experience with emojis and what we really think of them. There’s no stopping these little guys, with 56 new emojis moving onto your smartphone this autumn, so if you are thinking about using emojis within your email marketing we have some helpful advice…

The best way to really maximise the impact of these little icons and really drive increased engagement is to place them within your subject lines.

 

Emoji-Style Subject Lines

One excellent example of emojis within your subject lines is when they are used as an extension of your brand. For example, if you are a music company selling gig tickets, you could use a speaker emoji in a subject line:

Another attention grabbing example is the one I from travel agent, as shown below. The company was able to convey the call to action: Book a trip > Get on the plane > Enjoy the sunshine, all through the use of emojis.  With emojis taking up so few characters, they free up valuable space for this tech-savvy travel to convey their CTA hook: a ‘discount’ and sale’.

And here is my favourite one, from a fashion retailer who has taken email personalisation and targeted data to the emoji level. Not only did they send a birthday message, they also included a birthday balloon in the subject line:

Why Use Emoji Subject Lines?  They Help Boost Open Rates

There’s something about an emoji that simply makes people want to click. Why? The answer to that is actually quite interesting. According to TNW (The Next Web), when we see a face emoji online, the same parts of our brain react as when we look at a real human face hence the instant engagement with emoji. Our mood adjusts depending on the emoji’s association in our brain and sometimes we even mimic the emoji’s face expression subconsciously. At this point we engage with the emoji by opening an email/ reading an article or anything else that call-to-action (CTA) asks us to do as we empathize with these online avatars.

 

How To Use Emojis In Your Emails:

Inserting emoji is as simple as copying an emoji from a website/ document and pasting it into a subject line of your email. However to ensure the symbol displays correctly, make sure you test the email by sending it to yourself and your colleagues.

There are, however a few things that could go wrong when using emojis in the subject lines.  For example, the email client might not support emojis in the subject line, displaying the symbol ‘▢’instead.

The emojis will display differently depending on recipients’ operating system (see example right). Most browsers support emoji on iOS, OS X, Android and Windows operating systems.

For more info on emoji compatibility with emails and browsers, here are some helpful links:

Litmus – Emoji Support in Email

Can I Emoji – Browser Support

We’ve found a useful site where you can choose emojis and check how they would render within a different inboxes.

 

 

 

 

Emojis – Are They Good Or Bad?

 

It depends. As shown above, when used appropriately, emojis can convey emotions or act as an extension of your brand.  They also help shorten subject lines (1 emoji = 1 character), boost open rates and in turn click-through rates.

There is however, a risk of overusing or even misusing emojis. A big no-no for emoji use would be to insert an emoji within the main body of an email, especially if the context of the email is serious or has a professional target audience.

We also recommended to not replace words with emojis. The reason for that is the fact that recipients can’t always figure out what message the sender is trying to convey. For example a sentence ‘Have a Nice Day’, when used with an emoji would read as follows:

Everyone interprets an emoji symbol differently, so the question is – will your recipients correctly guess the word you are trying to replace? This is only a simple example but as you can imagine, the more complex the sentence the lesser chance the recipient will decrypt your message correctly.

There is also a risk that the emoji will not display at all or display as a question mark or empty box symbol and so the recipient would read ‘Have a � day. ‘

 

Think Before You Emoji

Emjois might seem like fun, but you should consider their use carefully.  You should avoid using them for sensitive or important matters as it may irritate or offend your recipients, as you could be seen to be trivialising the subject matter.

One recently unfortunate use of emojis that backfired was with an American politician who asked young voters on social media platforms to express their opinion on student loan debt using 3 emojis. What could possibly go wrong?  Quite a bit.

By using emojis in this fashion your target audience is likely to feel (as was the case here) that you are not taking them or the subject matter seriously.

You should also consider your brand and whether using emojis is appropriate for your tone of voice.  Some brands may be able to use emojis in the main body of the email copy, for example toys manufacturer or other brands that target younger audiences or millennials (apparently the latter are inseparable from emojis).

So always ask whether emojis are appropriate for your brand, and think carefully about the icons you choose and how you place them within your emails.

However you decide to implement them, please…

…use emojis responsibly.

So you’ve created the perfect email.  The HTML, CSS and design have all united together in a beautiful choreography, like a ballet dancer waiting to wow their audience.  Now – the last thing you want is for your email’s inbox performance to display View Online or Unsubscribe links as the first act people see.

You need to make an impact in the inbox, enticing the receiver to open your email above all others, and not delete it in one foul swipe.  “How do I do that?”  I hear you cry.  Fear not friend, Preview Text is your saviour.

What is Preview Text?

Preview Text is the first sentence or words from an email that are displayed in your inbox, under the Sender and Subject Line.

The format in your inbox runs like so:

Sender Name

Subject Line

Preview text

Most email providers, like Enabler, will let you control and customise the preview text that’s displayed in the inbox by allowing you to write your own sentence.  This way you can ensure you grab the attention of your audience before they even open the email, by avoiding the appearance of default text in your Preview Text – because lets face it, View Email Online isn’t really going to drive engagement.

 

Now You See It, Now You Don’t

There are two ways to use the Preview Text:

  1. Displayed in the email at the top

  2. Hidden in the code

More commonly, the Preview Text is hidden away to work it’s magic in the background.  If it’s displayed at the top or head of your email, it is referred to as a Preheader Text.  Don’t worry, you can still use hidden Preview Text alongside your Preheader.  If you set the Preview Text container above the Preheader in the HTML, it will appear first.  This could help push down text you don’t want displayed (like that pesky View Email Online)

Email Header example:

Get the best offers available today

To view email online click here

Email HTML example:

<body>
<div class=“preview-text” style=”display:none;font-size:1px;color:#333333;line-height:1px;max-height:0px;max-width:0px;opacity:0;overflow:hidden;”>Welcome to the new online store. </div>    
    
<table width=”100%”>
    <tr>
        <td align=”center” valign=“top”>
            Get the best offers available today <br>
            To view email online <a href=“##”>click here</a>
        </td>
    </tr>
</table>
</body>

 

Might look complicated, but what this clever piece of HTML does is bump the view email online text out of the inbox preview, like so:

Inbox results example:

Sender Name

Subject Line 

Welcome to the new online store.  Get the best offers available today.

The Preview Text Hack

So everyone has their own inbox display preferences, and sometimes we don’t get the choice.  You could be displaying 1, 2, even 3 lines of preview text, or annoyingly all of it – it all depends on the email provider.  This could result in the above inbox example displaying text you don’t want your audience to see, i.e:

Sender Name

Subject Line 

Welcome to the new online store.  Get the best offers available today. To view email online click here.

But don’t worry, we have it covered.  There’s a little hack that can help with this:

&zwnj;&nbsp;

No… I didn’t just fall on my keyboard and hit the keys at random.  This bizarre-looking strong of code stands for:

  • Zero width non joiners, or &zwnj;

  • Non breaking spaces, or &nbsp;

The idea is &zwnj;&nbsp; repeated will create white space after your preview text, effectively giving you an invisible buffer to bump down the unwanted copy from the Preview Text.

Example:

<div class=“preview-text” style=“display:none;font-size:1px;color:#333333;line-height:1px;max-height:0px;max-width:0px;opacity:0;overflow:hidden;”>Wow that’s short…&zwnj;&nbsp;&zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; &zwnj;&nbsp; Text you don’t want displayed</div>

The result, a beautifully tidy inbox display:

Sender Name

Subject Line 

Wow that’s short…

Emojis in Email

😀 😃 😄 😁 😆 😅 😂

These little characters have been around since the late 90s on our mobile phones.  In 2017, emojis have taken over our messages and have now stepped out of our mobile phones and onto the big screen with ‘Emoji Movie’.  There’s even a World Emoji Day on July 17th.

Now, coming to a subject line near you, the emoji is finding it’s place within your email inbox.

Like in the example above, some companies are opting for the subject line emoji as it can help capture the audiences’ attention, plus it allows you to have a bit of fun with the wide selection of icons available.

However, like a lot of new ideas in email (for example video or GIFs), emojis are not accepted across the board, as they will render differently across different devices and email platforms. Emojis are built around Unicode which is a standard set of figures that will display different emojis, for example:

U+1F602 = 😂

U+1F60D = 😍

U+1F601 = 😁

(A full list of emoji icons and their codes can be found here)

If you are planning on using emojis in your subject lines, test before you send otherwise your hip looking emails might turn out  looking a little square, as this ☐ icon will display if your emoji code can’t be recognised.

 

Roundup

A few more things to take into consideration when composing your Preview Text are:

  • Avoid letting the View Email Online into your Preview Text

  • Think of the Preview Text as a continuation of your Subject Line

  • Try some A/B testing with different Preview Text

  • Try not to repeat what is stated in the Subject Line

  • Test your Emojis

  • Try to use personalisation in your Subject Lines or Preview Text

  • Use the Subject Line or Preview Text to promote scrolling by referencing key points or articles lower down your email.

  • Be mindful of your character count – Preview Text can vary in different email clients and platforms, so don’t leave the best bits until the end.

Preview Text shouldn’t be an afterthought.  These small techniques can help to improve your open and click-through rates, and show your email as being professional and well thought out.

 

So go ahead, try some different combinations of subject lines and preview text.  Test, test, test those combinations, then sit back and watch the positive responses.

Well done!  Your performance is complete and your audience is demanding encores!